Welcome To MSK

diamond cutter hole saw

To puncture hard surfaces such as stone, brick, or concrete, one must employ a diamond cutter. Also known as a masonry hole saw, this device is inherently distinguished by its sharp tungsten carbide teeth – suited to slice through even tough substances with relative ease.

Depending on the challenge you’re up against, diamond cutters come in a range of sizes. For taking on something like a doorknob opening, you’d obviously want a smaller saw than you would for creating a window.

Securing the right diamond cutter for the job is essential, as the size as well as the type of teeth needed changes depending on the material. If you require cuts through stone, for instance, a totally distinct cutter is necessary in comparison to that which would be used to pave through concrete.

A diamond cutter’s usage is simple. Start by creating a pilot hole; make sure it is not wider than the cutter’s width. Afterwards, attach the diamond cutter to a rotational machine, such as a drill.

The cutter attached, it’s time to start drilling – BUT go easy! Gradually increase the speed as you work and ensure that the cutter remains level. This way you can guarantee an evenly cut hole.

As you work your drill, it will generate a mound of debris. In order to protect yourself against the dust, it is imperative that you don a dust mask.

After drilling is complete, the hole needs to be thoroughly cleaned. Employ a brush to sweep out any powdery residue and dust. For a final step, use a vacuum to suck up any remaining traces of dirt.

Armed with the knowledge of how to craft with a diamond cutter, you can embark on your next project with confidence. This versatile tool can be employed for tasks from installing a doorknob to sawing through stone, making even the most complex job a breeze.

Related Product

  • Diamond Turning Tools Outer Jewelry R Cutter

    Diamond Turning Tools Outer Jewelry R Cutter

      Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]

  • Lathe Bits MCD High Gloss Chamfer Tool

    Lathe Bits MCD High Gloss Chamfer Tool

      Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]

  • MCD High Gloss Chamfer Cutter For Gold

    MCD High Gloss Chamfer Cutter For Gold

      Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]

  • MCD Turning Tool Mirrow Finish R Cutter

    MCD Turning Tool Mirrow Finish R Cutter

      Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]

  • MCD Polishing Cutter for Gold Silver

    MCD Polishing Cutter for Gold Silver

      Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]

  • CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

    CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

      Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]

  • Single Crystal Diamond Polishing Cutter

    Single Crystal Diamond Polishing Cutter

      Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]


  • Post time: 2023-06-22
    Email
    WhatsApp