plasplugs diamond wheel tile cutter instructions

When you want to craft accurate cuts on porcelain or stone tiles, choosing the ideal tile cutter is paramount. The Plasplugs Diamond Wheel Tile Cutter – a handheld device – is the perfect choice. It functions by using a dry application, differentiating it from wet tile cutters utilized for ceramic surface finishes. Using the Plasplugs Diamond Wheel Tile Cutter is straightforward and provides consistent, spot-on results. Here’s how:

If you want to cut tile, you should start by finding a cutting wheel of the right size. It’s best to choose one that is either the same size as your tile or just a bit smaller.

Once you’ve decided where you’d like to make the cut, trace a light line on the tile with a pen or pencil. Mark that area as your guide for cutting.

Using the Plasplugs Diamond Wheel Tile Cutter, position the tile onto its cutting surface.

Ensure that the cutting wheel is in accordance with the line you have drawn on the tile.

Gently press the cutting wheel so as to etch the tile. Let the wheel travel over the surface, and provide it with a strong push forward to cause an impression in the tile.

With the tile scored, position your thumb on the tile’s rear and your fingers on the front.

Utilizing the score line as a guide, bend the tile until it breaks and separates along the previously-marked line.

For each tile you require, make sure you complete steps 1 to 7 once again.

The Plasplugs Diamond Wheel Tile Cutter is both convenient and precise, making it the ideal device for cutting porcelain and stone tiles. It boasts a user-friendly design and allows tile cutters to deliver accurate results with minimal effort.

Related Product

  • MCD High Gloss Chamfer Cutter For Gold

    MCD High Gloss Chamfer Cutter For Gold

      Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]

  • Diamond Turning Tools Outer Jewelry R Cutter

    Diamond Turning Tools Outer Jewelry R Cutter

      Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]

  • MCD Polishing Cutter for Gold Silver

    MCD Polishing Cutter for Gold Silver

      Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]

  • CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

    CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

      Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]

  • Lathe Bits MCD High Gloss Chamfer Tool

    Lathe Bits MCD High Gloss Chamfer Tool

      Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]

  • Single Crystal Diamond Polishing Cutter

    Single Crystal Diamond Polishing Cutter

      Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]

  • MCD Turning Tool Mirrow Finish R Cutter

    MCD Turning Tool Mirrow Finish R Cutter

      Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]


  • Post time: 2023-06-19
    Email
    WhatsApp