How to use a Polishing Cutter

Polishing cutters are a type of cutting tool that can be used to achieve a smooth, glossy finish on a workpiece. There are lots of different options out there, all crafted from robust materials such as diamond or carbide to maximise their efficacy with the material they’re intended for.

To start your polishing project, the first thing to do is identify the most suitable tool for the task. What type of cutter is needed will be contingent on the material you plan on working with. For instance, if you intend to refine a metal surface, you will require a different type of cutter than if you were polishing a glassy element.

Having secured the right polishing cutter for the job, your next step is to find the best speed and feed rate. This should be tailored according to the type of material you are dealing with, as well as what kind of finished product you hope to achieve.

Once the appropriate velocity and feeding rate are determined, the next step is to affix the polishing cutter to the apparatus. It is imperative that the cutting tool be firmly attached to ensure it does not separate while engaged.

With a firm attachment of the polishing cutter, we’re ready to pick up the pace and start cutting. However, moderation should be the key word here since if pressure is applied excessively, it can easily lead to the broken armor of the cutter. Therefore, move the cutter in a measured and consistent manner; those who rush in this part of the process are sure to be met with regret.

Once you begin cutting, the polishing cutter will be unmistakably removing pieces from the workpiece – however the amplitude of removal is dependent on which type of cutter you’ve deployed as well as the speed at which you are feeding into it.

Once you have completed the cuts, you must delicately remove the polishing cutter from the apparatus. Exercise acute caution during this step so as to not endanger the jobpiece.

After the polishing cutter has been removed, examining the workpiece is mandatory. Upon satisfaction with the results, the task is done. If the finish does not meet expectations, then a repeated ritual with an alternate polishing cutter is necessary.

Related Product

  • MCD High Gloss Chamfer Cutter For Gold

    MCD High Gloss Chamfer Cutter For Gold

      Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]

  • Lathe Bits MCD High Gloss Chamfer Tool

    Lathe Bits MCD High Gloss Chamfer Tool

      Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]

  • MCD Polishing Cutter for Gold Silver

    MCD Polishing Cutter for Gold Silver

      Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]

  • MCD Turning Tool Mirrow Finish R Cutter

    MCD Turning Tool Mirrow Finish R Cutter

      Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]

  • Diamond Turning Tools Outer Jewelry R Cutter

    Diamond Turning Tools Outer Jewelry R Cutter

      Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]

  • Single Crystal Diamond Polishing Cutter

    Single Crystal Diamond Polishing Cutter

      Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]

  • CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

    CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

      Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]


  • Post time: 2023-06-12
    Email
    WhatsApp