diamond cutter price philippines

In the Philippines, diamond cutting is a highly sought-after skill, as diamonds hold great cultural value to the country and its people. The cost of this specialized craft can differ drastically depending on the qualm of the cutter, the requested cut, and the size and quality of the diamond at hand. It is an intricate task that requires considerable expertise and experience, proving just how essential diamond cutting is within this culture.

To kick things off, it’s imperative that we comprehend the various diamond cutting choices that are available. Here in the Philippines, perhaps the most well-known options are brilliant, step, and fancy cuts. The glittering appearance of diamonds are largely attributed to the distinctive 57 or 58 facets of brilliant cuts. Next up, step cuts have rectangular or square profiles and significantly fewer facets compared to brilliant cuts – resulting in a muted and understated luminescence. Lastly, fancy cuts are truly singular choices and are available from classic figures like hearts to more contemporary shapes such as marquise and pear.

Costing of diamond cutting in the Philippines varies based on the cut requested, size of the diamond, and the expertise of the cutter. For instance, if you want a one carat diamond to be brilliantly cut, it can price from a minimum of Php 10,000 up to Php 50,000, contingent upon the cutter’s experience level. Requesting a step cut for the same would incur more affordable pricing, flowing from Php 8,000 to Php 40,000. On the other hand, fancy cut diamonds can run a bill anywhere between Php 15,000 and Php 70,000.

Diamond cutting in the Philippines is partially priced according to size. The larger a diamond, the more expensive it is to shape and finesse. As a tangible example, a one carat diamond will naturally fetch less than a two carat diamond, and the two carat gem will unlikely break the bank as much as a three carat piece.

The expertise of the diamond cutter undeniably influences the expense of diamond cutting in the Philippines. Highly proficient cutters able to fashion extraordinary quality pieces will warrant more substantial compensation than those with inferior experience or proficiency, whose substandard work will necessitate a reduced cost.

When it comes to diamond cutting, the total cost in the Philippines can be subject to a range of factors. Based on the cut size, cut type, and the cutter’s level of proficiency and expertise, prices can significantly differ – yet, fortunately, remain sensible. Someone with suitable dedication to research can discover an accomplished cutter with the capability to provide a precise cut at an economical rate.

Throughout history, diamonds have been coveted as representations of status, strength, and affection. Currently, diamond demand is continuously increasing, compelling diamond experts from the Philippines to stockpile a variety of offerings for those seeking a quality diamond. As a consequence of this upsurge in desire, the prices for these brilliant stones have risen as well.

When it comes to prices, diamonds in the Philippines range quite a bit, this depending on the quality of the gem, size, and cut. A one-carat diamond could set you back anywhere between 50,000 and 300,000 Philippine Pesos whereas going for two carats could cost within the spectrum of 150,000 and over one million. Thankfully, diamond cutters within the country can help buyers get better value for their money with services like assessing diamond quality, designing a shape and size that suits their preferences, or expertly polishing diamonds to make them sparkle.

When opting for diamond cutting in the Philippines, the cost of the service fluctuates depending on the type of cut desired. Those seeking the classic round brilliant cut are likely to face the highest fee, although alternatives such as the princess cut, the oval cut, the emerald cut, and the marquise cut may be more affordable. On top of type selection, the diamond cutter’s experience and skill also factor into pricing. Professionalism and expertise typically result in an increased investment; however, first-rate slicing often bolsters costly outputs.

The cost of diamond cutting in the Philippines has fluctuation based on the quality and variant of gemstone. Typically, higher-grade diamonds are more expensive to cut than lower-grade stones. Another factor which has an impact on cost is the type of cutting device employed; a laser or a traditional wheel cutter can be used in the crafting process.

Shopping for a diamond in the Philippines requires careful consideration and comparison of prices. To ensure a successful purchase, locating a trustworthy and knowledgeable diamond cutter is pivotal. Such an individual should extend any support needed by being open to answering queries and supplying information on the diamond’s authenticity and quality.

Ultimately, diamond cutting expenditures may vary significantly in the Philippines depending on the quality of gem, its dimensions, and the specific cut request. Consequently, shoppers must compare rates and select a dependable diamond cutter for their acquisition to guarantee they find the ideal diamond at a reasonable cost. By making smart decisions, buyers can acquire a dazzling diamond without sacrificing quality.

Related Product

  • Single Crystal Diamond Polishing Cutter

    Single Crystal Diamond Polishing Cutter

      Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]

  • MCD Turning Tool Mirrow Finish R Cutter

    MCD Turning Tool Mirrow Finish R Cutter

      Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]

  • Lathe Bits MCD High Gloss Chamfer Tool

    Lathe Bits MCD High Gloss Chamfer Tool

      Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]

  • MCD Polishing Cutter for Gold Silver

    MCD Polishing Cutter for Gold Silver

      Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]

  • MCD High Gloss Chamfer Cutter For Gold

    MCD High Gloss Chamfer Cutter For Gold

      Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]

  • Diamond Turning Tools Outer Jewelry R Cutter

    Diamond Turning Tools Outer Jewelry R Cutter

      Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]

  • CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

    CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter

      Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]

  • Post time: 2023-08-02